|
TO PRINT JUST THE PATTERN, RIGHT CLICK
ON THE IMAGE AND SELECT "PRINT PICTURE".
 Pussy Cat Ears
I've made 100s of things for my daughter but
these ears are her absolute favorite.
You Need:
Instructions:
Cut a piece of black foam to 2-1/2" x 12". Center
it on the top of the plastic head band. Glue the foam in place using a low temp glue gun.
Taper the foam along both edges to 3/8" an inch. Begin at the middle of one side and
foam the foam over the edge of the head band and glue in place. Continue by doing the
other half of the same side. Repeat for the other side.
Use wire cutters to snip the prongs of the brass fasteners.
Bend the remaining prong pieces down. Glue fastener heads to the top of the foam covered
head band beginning in the center and spacing 3/4" apart.
Print Ears
Pattern. Staple to animal print foam all around the outsides of the ears. Cut out all
four ears. Use a black marker to color in the white edges of the ears. Glue pieces back to
back so you will have two ears with animal print on both sides. Glue ears to head band.
You might also be interested in:
More Animal Crafts
| More for Halloween | More Dress-Up Ideas
MAIL IN COUPON ONLY, TO ORDER
ONLINE CLICK
HERE
|
