Set aside the inner cardboard circle. You won't need
it for this project. Paint box and lid, let dry. Cut out a circle of clear plastic from
the plastic bag to fit inside the box lid. Glue into place.
Print Bear Pattern. Staple all around pattern to craft
foam, making sure staples are outside the cutting line. Cut out pieces. Assemble the
bear's face using photo above as a guide. Use a black marker to draw a line beneath nose
and to add freckles on the cheek.
Run a bead of glue along feet base where shown on pattern. Position
box side on feet base, being careful to set forward enough so the lid is not glued in
place. Glue on head and arms. Finish with a bow and fill with candy.
Bear Candy Holder
